Categories
Contact Us

Add: 2nd Floor, C Building, Baifuhui Industral Park, East Jianshe Road, Shenzhen City, Guangdong Province, China.
Tel: +86-755-83764545
Mob: +8618007557734
E-mail: info@heng-ray.com

Knowledge
Home > Knowledge > Content
Mitsubishi analog-to-digital conversion module Q64AD/ADV/ADI wiring matters
Feb 12, 2019

1. Q64AD/Q68ADV Q68ADVI AC control circuit and external input signal should use isolation cable to avoid AC side surge and induction.

 2. When fixing the cable, do not let the cable be close to the main circuit line high voltage cable or load cable except PLC or bundle the cable with the main circuit line high voltage cable or load cable except PLC. This may increase noise surge and induction. Impact.

 3. Ground the shielding of the shielded wire and the welded-sealed cable at a single point.

 4. The solderless terminal with sleeve no solder joints can not be used for the terminal strip. It is recommended to use the marking tube or the insulating tube to cover the cable joint part of the press-fit terminal.

Please contact us to know more details…..


  • Newsletter
  • Categories
  • Contact Us

    Add: 2nd Floor, C Building, Baifuhui Industral Park, East Jianshe Road, Shenzhen City, Guangdong Province, China.
    Tel: +86-755-83764545
    Mob: +8618007557734
    E-mail: info@heng-ray.com

  • QR Code
  • Copyright © Heng-Ray Technology Limited All Rights Reserved.